◉ PRODUCT PARAMETERS
Basic Machine Parameters
[Dimensions & Weight] Overall Length 7050mm × Width 2495mm × Height 3560mm, Curb Weight 8850kg (only standard chassis configuration, excluding all optional accessories and rear trailers)
I. Standard Configuration
Powertrain
Equipped with Xichai CA6DM2/CA6DM3 inline six-cylinder turbocharged intercooled diesel engine, displacement 11.04L/12.52L, rated net power 309kW/420HP ~ 368kW/500HP, peak torque 1900–2300N·m, high-pressure common rail EFI + SCR aftertreatment, Euro II/Euro III/Euro V emission standards optional, suitable for long-distance container logistics in Saudi Arabia, Vietnam, Thailand and other Southeast Asian & Middle East regions. Matched with FAW CA12TAX210M 12-speed manual transmission with standard power take-off. Recirculating ball hydraulic power steering, front & rear drum air brakes, standard WABCO four-circuit protection valve and ABS anti-lock braking system. 457 double reduction 13-ton tandem rear axles with final drive ratio 4.111 and standard rear axle differential lock; braking system complies with international commercial vehicle safety norms.
Hydraulic & Auxiliary System
Hydraulic power steering system with 12L steering oil tank; dual air reservoirs with automatic drain valves. Standard hydraulic pipeline reservation for fifth wheel lifting and PTO lifting connection, three-stage oil-water separation air filtration with real-time air pressure monitoring alarm. Standard 90# fifth wheel with 40-ton rated load capacity, single 600L aluminum alloy fuel tank.
Chassis & Cab Configuration
J6P four-point mechanical suspended high-roof double-berth all-steel cab with 53° hydraulic forward tilting structure. Standard constant temperature air conditioner, shock-absorbing fabric driver seat, wide double sleeper, multi-function LCD instrument and driving recorder. Full 24V DC electrical system with real-time alarm modules for engine coolant temperature, oil pressure, exhaust temperature, air pressure and transmission oil temperature. Double-layer 8+8mm reinforced frame (300mm height), wheelbase 3450+1350mm, 9-ton FAW steer front axle, dual 13-ton 457 rear axles. Standard progressive multi-leaf spring suspension (10 leafs front / 12 leafs rear), factory-fitted 12R22.5 vacuum radial tires (11 units including spare tire). Minimum turning radius 7200mm, maximum design speed 95km/h, maximum towing weight 70 tons, factory dustproof & cooling reinforcement for high-temperature desert conditions in the Middle East.
Service Capacities
Engine oil: 23L
Transmission gear oil: 14L
Rear axle gear oil: 12L per axle, total 24L for dual axles
Steering hydraulic oil: 12L
Coolant: 32L
Fuel tank capacity: 600L
Urea tank capacity: 40L (Euro V only, none for Euro II/Euro III)
II. Optional Configuration (Dimension & Weight Increment Specified for Each Item)
Cab Interior Options
Remote central door lock + power windows: +5kg weight, unchanged overall dimensions
Ventilated & heated air suspended leather driver seat: +10kg weight, unchanged overall dimensions
Central control touch screen + 360° panoramic 4-way monitoring camera: +7kg weight, unchanged overall dimensions
On-board Bluetooth audio + vehicle refrigerator: +8kg weight, unchanged overall dimensions
Electric heated wide rearview mirrors: +6kg weight, width +30mm, height unchanged
Heightened sun visor wind deflector: +28kg weight, overall height +150mm
Travel & Drivetrain Chassis Options
CA12TAX260 16-speed AMT automatic transmission: +40kg weight, unchanged dimensions
Hydraulic retarder assembly: +66kg weight, unchanged dimensions
Reinforced heavy-duty balance suspension assembly: total weight +82kg, unchanged dimensions
Low-temperature preheating cooling kit for -40℃ frigid regions: +14kg weight, unchanged dimensions
Widened mine-pattern heavy-duty tires (replacement for standard highway tires): overall width +50mm, total weight +98kg
Lightweight full vehicle air suspension (replacement for leaf spring suspension): weight -240kg, unchanged dimensions
Auxiliary Working Equipment Options
LNG gas power assembly replace diesel engine: +265kg weight, width +45mm
Extended heavy-duty fifth wheel base: +32kg weight, overall length +100mm
Widened 95# heavy-duty fifth wheel (replacement for standard 90# fifth wheel): overall width +45mm, +38kg weight
Side-mounted extended 800L fuel tank assembly: +67kg weight, width +40mm
Full set of thickened wear-resistant chassis guards: +50kg weight, unchanged dimensions
Safety & Special Site Options
ID chip anti-theft immobilizer system: +4kg weight, unchanged overall dimensions
Remote vehicle fault diagnosis & GPS positioning module: +6kg weight, unchanged overall dimensions
Full-vehicle high-brightness LED auxiliary work light group: +11kg weight, overall height +45mm
-40℃ ultra-low temperature diesel preheating start kit: +9kg weight, unchanged dimensions
Reinforced thickened main frame assembly: +130kg weight, overall length +50mm
Complete set of mine puncture-resistant heavy-duty tires: overall width +50mm, +102kg weight
Full side skirts + front & rear steel anti-collision protective frame: +40mm width on each side (total width +80mm), +160kg weight
◉ FAQ
We supply a wide range of heavy-duty commercial vehicles, including dump trucks, tractor heads, water tank trucks, special-purpose vehicles, semi-trailers and other transportation and construction equipment.
The right configuration depends on your cargo, road conditions, load requirements and application. Our team can recommend suitable configurations such as 4×2, 6×4 and 8×4 based on your specific requirements.
One-year warranty for the entire machine; two-year warranty for core hydraulic and powertrain components; lifetime paid maintenance.
Supports comprehensive customization of attachments, powertrain, appearance, and operating specifications, and includes the provision of modification drawings.
Nationwide coverage with no blind spots; engineers dispatched to remote projects on an as-needed basis.
Possesses full qualifications for overseas operations and can handle all export formalities on your behalf.
◉ GET IN TOUCH
◉ Product Parameters