Zoomlion® ZX23AE Crawler Electric Articulated Aerial Work Platform

Basic Machine Parameters

[Dimensions & Weight] Stowed Overall Length 5440mm × Width 890mm × Height 1990mm, Standard 1.4m×0.7m Operator Platform, Rubber Non-Marking Crawler Undercarriage, Four Independent Hydraulic Extendable Outriggers, Operating Weight 3000kg (standard configuration only, excluding all optional accessories)

I. Standard Configuration

Powertrain

Equipped with 72V large-capacity lithium iron phosphate battery pack, permanent magnet synchronous drive motors for travel, slew and lift; fully electric closed hydraulic oil supply system, zero emission & ultra-quiet operation, compliant with indoor and outdoor environmental operation standards. Built-in BMS intelligent battery management system with multi-protection against overcharge, overdischarge, overload and extreme temperature. Travel integrated electromagnetic parking brake, self-locking hydraulic outrigger structure, safety system complies with GB/T 38133 & ISO 16368 aerial work machinery safety standards. Standard intelligent temperature-controlled cooling fan & battery low-temperature preheating module.

Hydraulics & Boom Working Equipment

Electric-driven variable displacement piston hydraulic pump, max system flow 32L/min, 42L hydraulic oil tank, total hydraulic system capacity 40L. Equipped with lift cushion circuit, outrigger synchronous leveling valve, boom anti-shock overflow valve, two-stage suction & return oil filtration system.
Standard multi-section folding articulated boom, max working height 23m, max platform floor height 21m, max horizontal outreach 10.5m, up-and-over clearance height 10.87m, below-ground reach 4.4m. Matched with 1.4m×0.7m operator work platform, rated platform load 200kg (restricted outreach) / 120kg (full outreach unrestricted). Turret 400° non-continuous slew, work platform ±90° left-right swing, zero tail swing radius, in-place steering.

Machine Configuration

Dual upper/lower integrated control panels, proportional joystick upper control, emergency lower control panel, standard emergency stop button, audio-visual overload alarm & tilt protection alarm. Full 72V DC electrical system with real-time audible & visual alarms for battery voltage, hydraulic oil temperature, outrigger levelness, boom angle and platform load.
Standard narrow non-marking rubber crawler undercarriage, crawler size 1755mm×230mm, minimum ground clearance 180mm, max climbing gradient 10°, approach angle 25°, departure angle 27°. Four independent telescopic hydraulic outriggers, full extension support footprint 3850mm×3850mm, narrow half extension footprint 5000mm×2600mm, non-slip rubber outrigger pads 260mm diameter.

Service Capacities

Total hydraulic system oil: 40L
Outrigger cylinder grease: 2.2kg
Boom hinge lubricating grease: 1.8kg
Battery cooling antifreeze: 5L
Hydraulic tank capacity: 42L

II. Optional Configuration (Dimension & Weight Increment Marked for Each Item)

Platform Control Options

1. 220V external power socket on platform: +4kg weight, unchanged overall dimensions
2. High-pressure air pipeline connector kit for platform: +5kg weight, unchanged overall dimensions
3. High-brightness LED work light set on platform: +3kg weight, unchanged overall dimensions
4. Raised reinforced safety guardrail for platform: +7kg weight, overall height +110mm
5. Quick-detachable extended sliding platform deck: +10kg weight, overall platform length +600mm
6. Wireless remote control operation system: +6kg weight, unchanged overall dimensions
7. Tool storage basket assembly for platform: +4kg weight, unchanged overall dimensions

Travel & Undercarriage Options

1. Heavy-duty wear-resistant steel crawler (replaces rubber non-marking crawler): overall width +60mm, total weight +110kg
2. Widened oversized anti-slip outrigger pad kit: support width +120mm, +22kg weight
3. -35℃ full machine battery thermal insulation heating kit: +18kg weight, unchanged dimensions
4. Full undercarriage anti-collision steel guard frame: +40mm width per side (total width +80mm), +86kg weight
5. Automatic crawler mud scraper assembly: +9kg weight, unchanged dimensions

Boom Working Equipment Options

1. Auxiliary hydraulic pipeline for grinding & breaking tools: +12kg weight, unchanged dimensions
2. Extended heavy-duty boom head assembly: overall length +480mm, +78kg weight
3. Full boom outer anti-scratch protective jacket set: +26kg weight, unchanged dimensions
4. Mini narrow indoor work platform (replaces standard platform): -32kg weight, unchanged overall length
5. Overhead lifting hoist heavy-duty fixture kit: +34kg weight, overall height +90mm
6. Full-boom electronic anti-collision distance sensing module: +11kg weight, unchanged dimensions

Safety & Special Site Options

1. GPS positioning remote fault diagnosis monitoring module: +5kg weight, unchanged overall dimensions
2. 360° panoramic full-machine surveillance camera group: +8kg weight, unchanged dimensions
3. All-weather flashing safety beacon & enhanced buzzer alarm kit: +6kg weight, overall height +40mm
4. Indoor dust-free anti-static full machine protection kit: +16kg weight, unchanged dimensions
5. Reinforced thickened main boom structural stiffener assembly: +102kg weight, overall length +55mm
6. Outdoor heavy rain full machine waterproof sealing upgrade kit: +14kg weight, unchanged dimensions
7. Forklift transport fixed base fixture kit: +45kg weight, overall length +130mm