• Product Center

    Full range of construction vehicle equipment

    ——

BEIBEN V3 6×6 All-Wheel Drive Off-Road Dump Truck

◉ PRODUCT PARAMETERS

Basic Machine Parameters
[Dimensions & Weight] Overall Length 9949mm × Width 2500mm × Height 3182mm, Curb Weight 11200kg (chassis + wear-resistant U-type cargo box, excluding optional accessories)

I. Standard Configuration
Powertrain
Equipped with Weichai WP10/WP12 inline-six turbo intercooled diesel engine, displacement 9.726L/11.596L, rated power 247kW/336HP ~ 276kW/375HP, peak torque 1250–1500N·m, mechanical direct injection / common rail optional, Euro II/Euro III/Euro V emission standards, suitable for high-temperature dusty mining areas in Africa, Central Asia and South America.
Matched with Fast 9JS150A/12JSD180T manual gearbox + L200 transfer case with high/low range, standard QH50 high-flow tipper PTO; Mercedes-Benz TAS85 recirculating ball hydraulic power steering; full air drum brake with WABCO valve set & ABS; full 6×6 all-drive axles under Mercedes-Benz license: 7.5-ton wheel-reduction steer drive front axle, dual 13-ton wheel-reduction middle & rear drive axles, all three axles with independent differential lock + inter-axle differential lock for off-road escape.

Hydraulic & Auxiliary System
Steering hydraulic tank capacity 12L; dual enlarged aluminum air reservoirs with auto drain valve; front-mounted heavy-duty lifting cylinder with independent high-flow hydraulic circuit; 4-stage oil-bath desert air filter for heavy dust mining sites, real-time air pressure audible & visual alarm.
Mining heavy U-type cargo box 5600×2350×1500mm, NM450 wear-resistant manganese steel (10mm floor, 8mm side plate) with external stiffeners, reserved chute for environmental cover; 400L iron fuel tank, 40L urea tank (Euro V only).

Chassis & Cab Configuration
V3 flat-roof short-double mechanically suspended cab, 52° hydraulic tilt; standard heating & air conditioning, shock-absorbing fabric driver seat, single short sleeper, combined mechanical meter, basic driving recorder. 24V electrical system with audible-visual alarm for coolant temp, oil pressure, exhaust temp and air pressure.
Mercedes-Benz variable-section fish-belly stamped reinforced frame, double-layer integrated beam; balanced suspension with heavy-duty leaf springs & thrust rods; factory 14.00R20 deep-tread off-road steel tires with anti-sink traction; factory dustproof & cold preheating pipeline for extreme desert & frigid environments.

Service Capacities
Engine oil: 22L
Transmission gear oil: 13L
Transfer case oil: 10L
Single drive axle oil: 15L, total 45L for 3 axles
Steering hydraulic oil: 12L
Lifting hydraulic oil: 22L
Coolant: 30L
Fuel tank capacity: 400L
Urea tank capacity: 40L (Euro V)

II. Optional Configuration (Weight & Dimension Change)

Cab Interior Options
Remote central lock + power windows: +4kg weight, no dimension change
Air suspension leather driver seat: +8kg weight, no dimension change
Touch screen + 360° panoramic camera: +6kg weight, no dimension change
Electric heated wide mirror: +5kg weight, width +28mm
Steel cab anti-collision guard: +22kg weight, width +42mm
Heightened wind deflector: +26kg weight, overall height +140mm

Drivetrain & Chassis Options
12-speed AMT transmission: +39kg weight, no dimension change
Hydraulic retarder: +65kg weight, no dimension change
Reinforced mining balance suspension: total +86kg weight
-40℃ full cold preheating kit: +15kg weight
Wide anti-sink 16.00R20 off-road tires: width +60mm, +103kg weight
LNG gas engine replace diesel: +265kg weight, width +48mm

Cargo Box & Lifting Options
Electric full environmental cover: +72kg weight, height +88mm
Extended 6200mm cargo box: length +320mm, +126kg weight
Import Hyva heavy lifting cylinder: +38kg weight
Side 600L aluminum fuel tank: +64kg weight, width +38mm
Full wrapped thick chassis guard: +50kg weight

Safety & Special Terrain Options
ID chip anti-theft immobilizer: +4kg weight
Remote diagnosis + GPS mining positioning: +5kg weight
Full LED work light set: +11kg weight, height +48mm
Triple-layer reinforced frame: +132kg weight, length +55mm
Side skirt + front/rear steel crash frame: each side +42mm width, +158kg weight
Brake water sprinkling cooling system: +35kg weight, height +72mm

◉ FAQ

Q: What types of vehicles do you supply?
A:

We supply a wide range of heavy-duty commercial vehicles, including dump trucks, tractor heads, water tank trucks, special-purpose vehicles, semi-trailers and other transportation and construction equipment.

Q: How do I choose the right truck configuration?
A:

The right configuration depends on your cargo, road conditions, load requirements and application. Our team can recommend suitable configurations such as 4×2, 6×4 and 8×4 based on your specific requirements.

Q: What is the warranty period for the equipment?
A:

One-year warranty for the entire machine; two-year warranty for core hydraulic and powertrain components; lifetime paid maintenance.

Q: Do you offer custom modifications for construction vehicles?
A:

Supports comprehensive customization of attachments, powertrain, appearance, and operating specifications, and includes the provision of modification drawings.

Q: Do you provide on-site setup, maintenance, and repair services for locations outside the local area?
A:

Nationwide coverage with no blind spots; engineers dispatched to remote projects on an as-needed basis.

Q: Can the equipment be exported overseas?
A:

Possesses full qualifications for overseas operations and can handle all export formalities on your behalf.

◉ GET IN TOUCH

Submit

◉ Product Parameters